Aquaprufe APF- C is a pre-applied HDPE waterproof membrane with a composite structure for excellent water-proofing performance.It consists of an HDPE sheet,a pressure-sensitive adhesive layer and a unique particulate layer.It can be installed on uniform concrete blinding or compacted sand-stone cushion for below ground water-proofing.It is also used for waterproofing confined surfaces or blind side applications,It is designed to fully and permanently bond with poured concrete after reinforcement placement.

• Full Bond to Concrete:Prevents water seepage;
• Displacement Resistant:Unaffected by ground settlement;
• Self-protecting:Trafficable after application,no need for additional layers,saving time and labor;
• Easy Installation:No priming or fillets needed;
• Water-Resistant: Unaffected by wet conditions;
• Water tight Laps &Detailing: Seamless adhesion.

• Waterproofing of all below grade concrete structures.
• Protection of concrete foundations in contaminated and aggressive ground conditions.
• Waterproofing of cut and cover tunnels for MRT,Subway, Metro.
• Prevents coal gas, marsh gas, methane leakage in underground layers.

• 20m*1m*1.2mm
• 20m*1m*1.5mm

• The storage temperature should be maintained between 5°C and 45°C,avoiding exposure to direct sunlight and rain.Adequate ventilation should been sured during storage.
• The material should be stored vertically as a single layer.Avoid contact withacids,alkalis,oils,organic solvents,etc.
• Shelf life is 12 months from the date of production under appropriate storage conditions.