SpiderWeb 200X Fiber Reinforced Waterproof Compound(1K) is a new type of composite waterproof material developed by using high strength fiber reinforced cohesion technology.The product is specially added with anti-crack fiber,which can effectively enhance the compressive and bending resistance of the coating,and can be pasted directly on ceramic tile.
1.Effectively enhance the cohesion, by using the technology of high strength fiber strengthening the cohesion；
2.High product strength and take effect quickly,which making the waterproof coating stronger and effectively preventing the brick-off phenomenon caused by the waterproof layer falling off；
3.Stronger adhesion, the coating film with fiber after it is actually dried, so that the tiles are bonded more firmly；
4.Flexural resistance, compression resistan-ce,impact resistance.It can effectively prevent the coating from cracking,and has a long service life.
1.Waterproofing for exterior walls and interior walls of buildings.
2.Waterproofing for water surface and back surface of underground works.
3.Waterproofing and moisture proof for indoor kitchen,bathroom,balcony and floor.
4.Waterproofing for fire pools, landscape pools, canals and dams.
25kg / bag
1.5~2.0kg/㎡ for 1mm-thickness film
（Note: The data belongs to the calculation of standard experimental environment and is for reference only. The actual amount should be calculated according to the site base surface.）
1. Surface Preparation: Clean and moisten the substrate (roughen smooth surfaces if needed).
2. Mixing: Mix powder with water at a 25:5–6.25 ratio until smooth.
3. Application: Reinforce joints if needed, then apply two coats uniformly across the entire area.
4. Curing: Allow sufficient curing before proceeding to final inspection and tiling.
1. Transport: Non-flammable/non-explosive; protect from rain, sunlight, freezing, and damage.
2. Storage: Keep in dry, ventilated, cool place; liquid component must remain abover 5°C.
3. Shelf life: Minimum 6 months under proper conditions.
