CKS White Undercoat is specially formulated to meet economical needs. It has good hiding and build and serves as a good foundation for High Gloss Diamond Series. It is suit- able for use on correctly prepared and primed interior metal and wood surfaces where economi-cal needs are required.
Cost-Effective Performance：Budget-friendly formula with excellent hiding power and film build for interior metal/wood surfaces.
Premium Base for Topcoats：Ideal foundation layer for CKS High Gloss finishes when applied on properly prepared substrates.
Its good build properties is good for use on primed metal, woodwork and previously painted surfaces prior to painting CKS High Gloss.
Pigment：Titanium Dioxide and Mineral Extenders
Binder：Alkyd
Volume Solid：58%
Diluent：White Spirit
Finishing：Matt Finish.
Colour：White
Theoritical Coverage：14 – 16 ㎡/Litre
Drying Time：* Touch dry – 45 minutes.
* Hard dry – 2 hours.
* Dependent on temperature and humidity.
Recoating Interval：2 hours.
1.Wood surface:Wood must be dry and free from grease, dirt and other contaminants, smoothen surface with suitable grade sand paper and dust off before application of undercoat and paints.apply 1 coat of CKS White Undercoat,then finish with 1-3 coats of CKS High Gloss.
2.Metal surface:Surface must be dry and free from grease, dirt and other contaminants. Steel surfaces should be sanded or wire-brushed to remove mill scales and rust. For best result steel surfaces should be prepared by hand or power tool to BS 7079 Part 1: 1989 S T 3 standard. Galvanised and Aluminium surfaces should be cleaned and degreased, apply an appropriate primer to ensure good adhesion.apply 1 coat of CKS Red Oxide Primer,then finish with 1-3 coats of CKS High Gloss.
