CKS PU Solar Wood is a premium translucent wood varnish formulated with modified alkyd resin. Designed to accentuate natural wood grains, it provides robust protection against moisture, UV damage, mold, and wood rot. Its flexible film resists cracking, peeling, and blistering, ensuring long-lasting beauty and durability for all timber surfaces.
Enhanced Wood Aesthetics:Translucent modified-alkyd formula accentuates natural wood grains while adding rich color.
All-Weather Protection:Resists moisture, UV damage, mold and wood rot for comprehensive timber preservation.
Flexible Durability:Non-cracking, peel-proof film maintains structural integrity through seasonal changes.
Suitable for use in both interior and exterior where maintaining the texture of wood is desired.
Pigment：Lightfast non-lead pigments and mineral extenders .
Binder：Urethane alkyd base
Volume Solid：40 +/- 2%
Diluent：White Spirit.
Finishing：Gloss finish
Colour：Refer to color card.
Theoritical Coverage：10 – 12 ㎡/ Litre (actual coverage dependent on substrate condition.)
Drying Time：*Touch dry – 30 minutes.
*Hard dry – 3 – 4 hour.
*Dependent on temperature and humidity.
Recoating Interval：4 hours.
1.New Wood Surface:Surface generally must be clean, dry and free from oil, dirt, wax, grease or other contaminants. Recommend to test color on wood before decide the shade as final color shade depends on the type of wood applied. If gum is presence on surface, it must be clean by lacquer thinner. For recoating, the surface must be rub and clean.
2.Previously painted surface should be thoroughly rubbed down using suitable sandpaper and then dusted off.
3.After completing the surface preparation steps,apply 1-3 coat of CKS PU Solar Wood.
5 Litres, 20 Litres
