This product is made from imported heat-reflective materials and polymer emulsions through self-crosslinking chemical reactions. After film formation, the coating has high heat reflection performance and possesses advantages such as waterproofing, weather resistance, and dirt resistance. It can effectively reduce the surface temperature of roofs and is suitable for various waterproof and energy-saving construction projects. It is a new type of material that combines waterproofing, heat insulation, and reflection.

1. Roofs;
2. Indust rial facilities: factor ies, warehouses, exhibition halls;
3. Energy-Efficiency projects: commercial/industrial building retrofits.

5kg/pail，20kg/pail

1. The coating is UV-resistant and has excellent weather resistance, and can maintain excellent performance in various environments;
2. Excellent solar reflectance, slowing down the aging process and effectively extending the service life of waterproofing;
3. Good heat insulation, sun protection and cooling effects, effectively reducing the surface temperature of the base layer under hot climate conditions, reducing indoor cooling energy consumption, and saving energy and reducing carbon;
4. Excellent stain resistance, can keep the coating clean and maintain a high solar reflectance；
5. Significant temperature reduction: It has excellent heat insulation and cooling effects, and even after being exposed to high temperatures, the coating surface remains cool to the touch；
6. Strong waterproof performance: The coating is tough and water-resistant, effectively providing waterproofing and leakage prevention.

• Preparation: Check the condition of the substrate, repair any holes, depressions, voids, and cracks on the surface. Remove oil, debris, and floating dust from the substrate, and keep the surface dry and clean.
• Primer application: Mix and stir the coating and water in a ratio of approximately 1:0.2, then apply the primer after thorough mixing.
• Topcoat application: Depending on the project requirements or sample specifications, brush, spray, or roller application can be chosen, and at least two coats are needed for application.

• As this product belongs to fast-setting waterproofing materials, it is recommended to fully prepare before construction, use immediately after mixing, and avoid adding water after initial setting.
• The setting time may vary due to differences in water quantity and construction temperature. Mixing with ice water or warm water can ensure construction time and setting speed.
• After opening, unused product should be resealed to avoid performance degradation.
• This product generates heat during curing, so appropriate protective measures should be taken to prevent overheating and cracking.
• Please wear protective gloves, masks, and goggles during product application. In case of contact with eyes and skin, rinse thoroughly with clean water and seek medical attention if discomfort persists.