CKS Aquaflex 107 is a two-component, polymer-modified cementitious waterproof slurry. It consists of a liquid polymer and a cement-based powder blended with specialized additives. It is applied to concrete or mortar surfaces to block water penetration.

1.Stable volume, low shrinkage, anti-cracking and hollowing;

2.Two-component product, precise proportion, easy to mix and apply;

3.Excellent anti-permeability, protecting concrete from carbonization and water penetration;

4.Super strong bonding, preventing the exterior wall from hollowing and falling off.

1.Waterproofing and anti-seepage engineering of interior and exterior walls of buildings;

2.Waterproofing and moisture-proofing of kitchens, bathrooms, floors, pools,etc.;

3.Waterproofing of the water-facing and water-repellent surfaces of underground projects.

1.7–1.9 kg/m² per 1mm

1. Surface Preparation: Clean and moisten the substrate (roughen smooth surfaces if needed).
2. Mixing: liquid and powder at a 1:4 ratio, stirring for 3-4 minutes until smooth, without particles or lumps.
3. Application: Reinforce joints if needed, then apply two coats uniformly across the entire area.
4. Curing: Allow sufficient curing before proceeding to final inspection and tiling.

1. Transport: Non-flammable/non-explosive; protect from rain, sunlight, freezing, and damage.

2. Storage: Keep in dry, ventilated, cool place; liquid component must remain abover 5°C.

3. Shelf life: Minimum 6 months under proper conditions.

25kg/set (liquid material + powder material = 5kg + 20kg)